Category ----- Tools
Sub Category - Green Stuff World
Paints / Glue are not included with any kit
(unless stated otherwise.)
This is a New Item -
GSW offers a brand new alternative for artists and modelers seeking to create water effects with this Ultraviolet Resin.
A one-step gel with crystal transparency, squeeze this product straight from the bottle onto your diorama or miniature base to create beautiful replicas of the sea, rivers, lakes, ponds or puddles. It has a multitude of advantages over other traditional ways of creating water effects:
Ultrafast drying gel. This product can be combined with a UV Torch to dry in 2-4 minutes. On a sunny day, the gel has a drying time of 5-10 minutes. On a cloudy day, 20-40 minutes.
Can be dyed. The UV Resin can be mixed with any of our Intensity or DYE inks to dye the gel with only a few drops, allowing it to create different types of water, such as bogged swamps or radioactive lakes!
IMPORTANT! If you want to dye the UV resin with any of our CANDY inks it should be applied when the resin is fully cured.
Doesn't shrink. The UV Resin doesn't shrink like other water-replicating materials. The quantity of resin used is the quantity of resin you get when fully dried.
Multilayer friendly. In case you want to create the effect of submerging something in the water, multiple layers can be placed on top of each other without leaving layer marks.
Can be cut, polished, and worked easily. The resin is easy to manipulate and can be shaped and carved however you want!
Low smell and toxicity compared to more traditional methods.
* When the resin is in its non-solid state you can use a heat gun or a kitchen lighter to heat the resin and force out any air bubbles that may have gotten caught in it.
* Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.
* Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize.
UV resin warnings
- Environmental conditions can affect the properties of the material
- Use in a dry, ventilated place and at a temperature between 18 ° C and 25 ° C is recommended. Extreme cold and heat can damage the material.
- Use under inadequate conditions, inadequate exposure to UV light or insufficient UV light output can result in the surface feeling tacky after curing. In this case, we recommend applying more UV light or gloss varnish.
- We recommend consuming the product within 10 months. The shelf life of the product may decrease after opening depending on the state of preservation, exposure to UV light and low temperatures.
Green Stuff World: 2045